Baroness SP160EB, Руководство по эксплуатации для владельца

Страница: 35 / 83

Adjust the rake height.
The height of raised rake can be adjusted by
the link of the cross link chains.
As a standard, 8 links of chain are used.
Lower the rake on a level surface.
Loosen the nut.
Reduce the number of chain link.
Raise the rake.
Adjust the rake stopper so that it lightly
touches the rake, and then tighten the nut.
Raise and lower the rake to check that it
lightly touches the rake stopper.
4
3
2
1
mafeci-006
Adjustment of Rake_002
1 Cross-link chains
2 Rake stopper
3 Nut
4 Rake
Adjustment of Blade
Note:
Depending on the specifications, this function
may not be available.
The blade can be adjusted with the bolt.
Loosen the bolt, and then move the small
blade to the desired position.
Toward A to take a thin layer from the
surface of the sand
Toward B to take a thick layer from the
surface of the sand
2.
[1]
[2]
[3]
[4]
[5]
[6]
1.
[1]
[2]
Tighten the bolt.
5b7smu-001
A
B
1
2
Adjustment of Blade_001
1 Bolt
2 Small blade
Adjustment of Finishing Brush
Note:
Depending on the specifications, this function
may not be available.
The height of the finishing brush can be
adjusted by moving the right and left movable
arms while griping the right and left clutch
levers.
Return the clutch levers after adjusting the
height of the brush on the ground according to
the bunker conditions.
The mounting height can be adjusted to one of
four levels.
When traveling, adjust to the lowest position.
1
2
f5zgea-001
Adjustment of Finishing Brush_001
1 Clutch lever
2 Movable arm
2.
1.
Handling Instructions
SP160EB
Handling Instructions
Page 4-15
Adjustment before Work