Baroness SP160EB, Руководство по эксплуатации для владельца

Страница: 30 / 83

Steering Wheel
Inspection of Steering Wheel
Make sure that there is no play in the
steering wheel.
Make sure that the steering wheel can be
turned smoothly without abnormal noise,
etc.
Make sure that the steering chain is not
overtightened and is not loose.
Make sure that there are no cracks,
damage or abnormal wear in the steering
chain.
Transmission
Inspection of Transmission Oil
Place the machine so that its frame will be
level, and then make sure that the
transmission oil level is at the oil level plug
at any time.
The oil level plug is located on the left side
of the transmission.
Check underneath the machine for oil
leakage.
v3g3u2-013
2
1
Inspection of Transmission Oil_001
1 Transmission
2 Oil level plug
Supply of Transmission Oil
Important
Do not mix different types of transmission oil.
Important
Be sure to pour automobile gear oil that is
classified as SAE Viscosity Grade #90 into the
transmission.
Remove the oil filler cap.
1.
2.
3.
4.
1.
2.
1.
Supply transmission oil through the oil filling
port.
v3g3u2-014
1
2
Supply of Transmission Oil_001
1 Transmission
Oil filler cap
Check the oil level again 10 to 20 minutes
after replenishment.
Check underneath the machine for oil
leakage.
Cooling Fins
Inspection of Cooling Fins
Make sure that there is no damage to the
cooling fins.
Make sure that the cooling fins are not dirty.
Oil Leakage
Inspection of Oil Leakage
After approximately 50 hours of operation,
some joints may be loosened and oil and
grease may leak.
Be sure to retighten the parts.
Check the bottom of the machine for oil and
grease leakage.
2.
3.
4.
1.
2.
SP160EB
Handling Instructions
Page 4-10
Inspections