Baroness SP160EB, Руководство по эксплуатации для владельца

Страница: 69 / 83

1 Bolt
2 Finishing brush
3 Rake
Caution
Place the finishing brush on level surface.
Remove the bolts, and then replace the
finishing brush.
1
2
9l7sqe-002
Change of Finishing Brush_002
1 Bolt
2 Finishing brush
Tighten the bolts.
Removing/Installing Tires
Front Tire
Follow the steps below to remove the front
tire.
Securely place the jack beneath the jack-up
points of the front left/right frame area, and
then raise it until the tire lifts off the ground.
"Jack-Up Points" (Page 5-6)
Follow the steps below to remove the tire.
Loosen the lock bolts for the left rhombic
flange unit.
Remove bolt A.
Remove bolt B and nut B, and then
remove the left rhombic flange unit.
Remove bolt C and nut C, and then
remove the right rhombic flange unit.
Remove the front wheel arm.
2.
3.
1.
2.
[1]
[2]
[3]
[4]
[5]
Remove the wheel mounting bolt, and
then remove the tire.
2
7
3
8
4
6
5
1
1
lm2ieh-006
Front Tire_001
1 Lock bolt
2 Bolt A
3 Bolt B
4 Nut B
5 Bolt C
6 Nut C
7 Front wheel arm
8 Wheel mounting bolt
Important
Tighten the bolts in the tightening order
(diagonally).
For installing the front tires, reverse the
removing procedure.
[6]
Maintenance
SP160EB
Maintenance
Page 5-13
Maintenance Work