Baroness SP160EB, Руководство по эксплуатации для владельца

Страница: 68 / 83

Change of The Cultivator Fitting
Note:
Depending on the specifications, this function
may not be available.
Caution
When removing the cultivator, be careful not
to pinch your hands.
When wear of the trapezoidal cultivator fitting
disables unhardening the sand, replace the
trapezoidal cultivator fitting.
Remove the bolts at the bottom of the
machine on the right side.
1
3
2
5qpzvh-001
Change of The Cultivator Fitting_001
1 Lever pipe
2 Trapezoidal cultivator fitting
3 Bolt
Remove the bolts at the bottom of the
machine on the left side.
1
2
5qpzvh-002
Change of The Cultivator Fitting_002
1 Cultivator
2 Bolt
Pull out the cultivator from the bottom of the
machine.
1.
2.
3.
Remove the bolts, and then replace the
trapezoidal cultivator fittings.
1
2
5qpzvh-003
Change of The Cultivator Fitting_003
1 Bolt
2 Trapezoidal cultivator fitting
Tighten the bolts for the trapezoidal cultivator
fitting.
Caution
When installing the cultivator, pay attention to
its falling.
Install the cultivator to the machine with
bolts.
Change of Finishing Brush
Note:
Depending on the specifications, this function
may not be available.
Caution
Be careful since the finishing brush is heavy.
When wear of the finishing brush results in
rake tracks remaining, replace the finishing
brush.
Remove the bolts from the rake, and then
remove the finishing brush.
1
2
3
1
9l7sqe-001
Change of Finishing Brush_001
4.
5.
6.
1.
SP160EB
Maintenance
Page 5-12
Maintenance Work