Baroness SP160EB, Руководство по эксплуатации для владельца

Страница: 66 / 83

Close the driver platform, and then firmly
secure the rubber catch.
Cleaning inside The Driver Platform
Important
Do not allow water to come into contact with
electrical components during cleaning.
It will cause malfunction of the machine.
Important
Do not use fluid such as water and high-
pressure air for cleaning inside the driver
platform.
Do not use a wet cloth nor high-pressure air.
It will cause malfunction of the machine.
Be sure to remove dust attached inside the
driver platform.
Especially after operating the machine in a
dusty environment, it is important to remove
dust as soon as possible.
Follow the steps below to remove the driver
cover.
Open the driver platform.
Remove the long nuts A.
3xr1u1-001
1
2
Cleaning inside The Driver Platform_001
1 Driver cover
2 Long nut A
Close the driver platform.
Remove the long nuts B.
3.
1.
[1]
[2]
[3]
[4]
Remove the driver cover.
3xr1u1-002
1
2
Cleaning inside The Driver Platform_002
1 Driver cover
2 Long nut B
Clean the inside of the driver platform with
low-pressure air.
Follow the steps below to remove the servo
driver cover.
Remove the screws.
Remove the servo driver cover.
3xr1u1-003
1
2
2
Cleaning inside The Driver Platform_003
1 Servo driver cover
2 Screw
If sandy dust accumulates on the circuit
board inside the servo driver, remove it
carefully with low-pressure air.
3xr1u1-004
1
Cleaning inside The Driver Platform_004
[5]
2.
3.
[1]
[2]
4.
SP160EB
Maintenance
Page 5-10
Maintenance Work