Baroness SP160EB, Руководство по эксплуатации для владельца

Страница: 34 / 83

Adjustment before Work
Adjustment of Steering Wheel
Warning
Since it is dangerous, do not adjust while
traveling.
Caution
Be sure the steering wheel position is securely
locked.
It may result in an unexpected accident if it
becomes loose while traveling.
The steering wheel can be adjusted up or
down with the tilt lever.
Adjust the position according to the operator's
body size.
Shift the tilt lever to the "FREE" position, move
the steering wheel to the position that suits
your work requirements, and then shift the tilt
lever to the "LOCK" position to secure it.
The tilt lever is located to the left of the driver's
seat.
A
1
B
75uxaw-009
Adjustment of Steering Wheel_001
1 Tilt lever
A FREE
B LOCK
Adjustment of Seat
Use the seat adjustment lever to adjust the
seat back and forth.
Adjust the position according to the operator's
body size.
The adjustment lever is located beneath the
front part of the seat.
1
2
s1gskp-021
Adjustment of Seat_001
1 Seat
2 Adjuster lever
Adjustment of Rake
Adjust the fork prong bar.
The working depth of fork prong bar can be
adjusted with the nut.
On a level surface, lower the rake, and
then drive the machine forward about
approximately 20 cm (7.87 in).
Place a wooden board with a thickness of
about 15 mm (0.59 in) under the warp
board.
Adjust the fork prong bar to a position
where the rake load is applied to the
wooden board and the tip of the fork prong
bar lightly touches the ground, and then
lock it in place with the nut.
1
2
3
4
5
A
75y9my-001
Adjustment of Rake_001
1 Warp board
2 Nut
3 Fork prong bar
4 Flat concrete surface
5 Wooden board
A 15 mm (0.59 in)
1.
[1]
[2]
[3]
SP160EB
Handling Instructions
Page 4-14
Adjustment before Work