13. Type in 24 <Enter>, saves settings.
14. Press ESC to exit setup menu.
15. Procomm is now ready to accept input from the
DIamond TII.
16. To begin downloading a file, Type ALT-F1, and give
the file an appropriate name when prompted.
The optional printer (part no. AY1137X1) provides a paper
tape record for future reference.
During normal recirculation, the printer prints date, time, purity
and temperature readings once every minute.
Connecting and Starting the
Printer
1.
Make sure the printer and DIamond TII are turned
OFF.
2.
Connect the DIamond TII to the printer via the
RS232 port on the back left side of the unit. Use the
tan printer cable included with the Epson printer.
Plug the printer power cord into an electrical outlet.
3.
Turn power on to the DIamond TII and printer.
4.
Press MENU and use the up or down arrows until
display reads, “SYSTEM OPTIONS.”
5.
Press OK.
6.
From the “Printer Attached” display, press the up or
down arrow for “YES”.
7.
Press OK.
8.
Press the BACK arrow twice to return to the
STANDBY mode.
9.
During normal recirculation mode, a purity and tem-
perature reading will be printed once every 12 min-
utes.
C
OMPUTER
/P
RINTER
S
ETUP
39