16
Quick Disconnect Fittings
These fittings are found on the water inlet. (See Fig. 5)
To insert the inlet tubing:
1.
Press on the metal thumbpad on the coupling
body to ensure the fitting is open.
2.
Wet the o-ring on the coupling insert and push
into the coupling body until you hear a click.
Gently pull on the tubing to ensure it is secure.
3.
To remove, press the metal thumbpad to release
and pull coupling insert out.
I
NSTALLATION
Coupling Insert
Push down on thumbpad
to release coupling insert
Coupling Body
Figure 5: Quick Disconnect
Note
The quick disconnect fittings contain
valves and if not properly inserted
water will not flow.
