Barnstead|Thermolyne NANOpure DIamond D11951, Руководство по эксплуатации

Страница: 36 / 56

36
Figure B: Control Panel
Paper Feed Button Paper Out Light
Error Light
Power Light
Figure A: Printer
ON/OFF Button
10. During normal Recirculation mode, a
resistivity/conductivity and temperature reading
will be printed once every 12 minutes. If “Use
TOC Analyzer” has been set to “Yes,” the TOC
data will also be printed.
Printer Setup
Power Switch
Located on the front of the printer (AY1137X1), this switch
turns power to the printer ON and OFF. (See Figure A.)
The green POWER light will illuminate when the printer is
ON.
Paper Feed Button
Press this button once to advance the tape one line, or
hold the button down to advance paper continuously.
When the paper roll nears the end, the red PAPER OUT
light will illuminate.
If the red ERROR light illuminates, the printer is off line.
This could be a result of the print head being too hot, in
which case the printer will resume printing once it cools
down; or—the paper may be jammed in the printer. Turn
the printer OFF before checking for jammed paper.
Remove the paper jam and turn the printer back ON. If
the printer still will not print, unplug it and refer servicing
to qualified personnel.
C
OMPUTER
/P
RINTER
S
ETUP