13
FEATURES
The control panel for all models has a series of command keys which
enables the user to enter set point values for temperature, carbon dioxide, door
heat and to calibrate the unit as required. LED readouts provide the user with
current status information regarding the foregoing parameters.
CONTROL PANEL:
SET
CAL
CO2
TEMP
DOOR
SCAN
ºC
%CO2
HEAT
HOLD
HI LIMIT SAMPLE
1
2
3
4
5
6
7
8
9
10 11
12
1.
LED READOUT: The LED displays current CO
2
tension and temperature
in the Incubator and, in the set mode, displays the set point values
for these two parameters as well as door heat setting. It also enables the
user to enter values necessary to calibrate temperature and CO
2
.
Indicating lights and legends serve to identify which parameter is being
displayed.
2.
SET COMMAND KEY: The
SET
key is the beginning point for and
initiates subsequent actions of the other keys on the control panel.
3.
CAL COMMAND KEY: The
CAL
key permits calibration of temperature
and CO
2
when in this command mode. The Up and Down arrow keys are
used to change the readout to correspond with the readings obtained from
known standards of temperature or CO
2
measurement. Both temperature
and CO
2
calibration use the zero point shift method.
FEATURES:
(Con’t)
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
