Service department
Barkey GmbH & Co. KG - Gewerbestrasse 8 - 33818 Leopoldshoehe - Germany - Telephone: +49(0)5202-9801-0
29
Service department: +49(0)5202-9801-30 Fax: +49 (0)5202-9801-99 - email: [email protected]
Instructions for Use
Barkey S-line
8
Service department
The Barkey S-line is maintenance-free and is not susceptible to faults. If a repair becomes neces-
sary in spite of the careful selection of components and a high production quality, the following
should be noted:
Please send defective devices for recycling-repair to Barkey GmbH & Co. KG. Barkey GmbH &
Co. KG will ensure the correct separation of materials and the disposal of the materials.
We recommend that you have necessary repairs carried out by Barkey GmbH & Co. KG or that
your technical personnel attends special product training with regard to inspection and mainte-
nance.
On request and against a nominal charge the manufacturer will supply servicing instructions that
contain all the required circuit diagrams, parts lists, inspection instructions and service information
by means of which suitably trained and qualified technical personnel can repair all the parts of the
device that the manufacturer considers to be repairable.
If the device cannot be repaired or maintained on site it must be sent in.
Before shipping
the device, please note the following rules:
•
Send the defective device for recycling-repair only to Barkey GmbH & Co. KG or an
authorised sales partner.
•
The device must be cleaned and, where applicable, disinfected before shipping.
•
The shipped device must not cause any risk to health, eg through toxic, carcinogenic,
biologically hazardous or radioactive substances. The shipper shall be liable for
damage or injury caused by inadequate cleaning or disinfecting.
•
Include a form evidencing cleaning with each shipped device. You can obtain appro-
priate forms on request from Barkey GmbH & Co. KG.
•
Devices that have not been cleaned and devices without a cleaning certificate will be
returned to the sender for safety reasons without being inspected or repaired.
•
Comply with the instructions for cleaning and disinfecting in these instructions
for use.
•
Please enclose a brief description of the fault with the device. This will save you the
costs of an expensive search for faults.
•
Pack the device for shipping to Barkey GmbH & Co. KG in such a way that trans-
port damage is reliably prevented. Barkey GmbH & Co. KG does not assume any li-
ability for transport damage caused by inadequate packaging.
The service department of Barkey GmbH & Co. KG can be reached
Monday to Friday
07.00 - 20.00
Saturday and Sunday
10.00 - 18.00
at the telephone number
+49(0)5202- 9801-30
email: