
Safety information
18
Barkey GmbH & Co. KG - Gewerbestrasse 8 - 33818 Leopoldshoehe - Germany - Telephone: +49(0)5202-9801-0
Service department: +49(0)5202-9801-30 Fax: +49(0)5202-9801-99 - email: [email protected]
Instructions for Use
Barkey S-line
3.4.3
Recommended safe clearances
Recommended safe clearances between portable and mobile
HF telecommunication appliances and the Barkey S-line
The Barkey S-line is intended for use in an electromagnetic environment in which the HF distur-
bances are controlled. The customer or the operator of the Barkey S-line can help to avoid elec-
tromagnetic disturbances by complying with the minimum clearance between portable and mo-
bile HF telecommunication appliances (transmitters) and the Barkey S-line as shown below - in
dependence on the output power of the communications appliance.
Safe clearance in dependence on the transmission frequency m
Transmitter's
nominal output
W
150 kHz to 80 MHz
P
d
17
,
1
=
80 MHz to 800 MHz
P
d
17
,
1
=
800 MHz to 2.5 GHz
P
d
33
,
2
=
0.01
0.12
0.12
0.23
0.1
0.37
0.37
0.74
1
1.17
1.17
2.33
10
3.69
3.69
7.38
100
11.67
11.67
23.33
The recommended safe clearance
d
in meters (m) can be determined for transmitters whose
maximum nominal output is not shown in the above table by using the equation that belongs to
the respective column, whereby
P
is the transmitter's maximum output in watts (W) in accor-
dance with the transmitter manufacturer's information.
NOTE 1 With 80 MHz and 800 MHz the higher frequency range applies.
NOTE 2 These guidelines may not be applicable in all cases. The propagation of electromag-
netic variables is influenced through absorptions and reflections from the buildings, objects and
people.