
Device description
Barkey GmbH & Co. KG - Gewerbestrasse 8 - 33818 Leopoldshoehe - Germany - Telephone: +49(0)5202-9801-0
7
Service department: +49(0)5202-9801-30 Fax: +49 (0)5202-9801-99 - email: [email protected]
Instructions for Use
Barkey S-line
2.4
Symbols on adhesive labels
The following symbols can be seen on the adhesive labels on the Barkey S-line:
This symbol explains the device's conformity with EU Directive
93/42/EEC of 14 June 1993 for medical devices. The four-digit number
designates the notified body (TÜV SUED Product Service GmbH) that
monitors the manufacturer's quality assurance system.
IP X2
This symbol states that the device is protected in the planned operating
conditions against water drops falling up to 15° from the vertical in
accordance with IEC 601-1.
This symbol indicates that the warming devices connected to the Barkey
S-line are approved for use on the human body. The device's so-called
"application parts" are type BF (body floating). In addition, all devices
in the Barkey S-line are defibrillation protected.
2009
The four-digit number in this symbol shows the year of manufacture.
This symbol indicates that the device must not be disposed of with
household waste. It must be handed to a waste disposal company or
returned to the manufacturer for disposal. (EU Directive 2002/96/EC on
waste electrical and electronic equipment, WEEE)
This symbol points out that the operator must read these instructions for
use before using the device.
This symbol points out that the device must be disconnected from the
mains before the housing is opened.
2.5
Earthing stud
The Barkey S-line is fitted with an earthing stud. The earthing stud is intended solely for connect-
ing a test conductor for an electrical safety check. Equipotential bonding conductors must not be
connected to this earthing stud.