Bard MULTI-TEC W18AAPA, Инструкция по эксплуатации

Страница: 34 / 116

Manual 2100-676D
Page 3 of 45
GENERAL INFORMATION
Air Conditioning System
This Bard air conditioning system is composed of MULTI-
TEC wall-mounted air conditioners matched with an
LC6000 supervisory controller or Bard th-TUNE stand-
alone controller. If only one wall-mounted air conditioner
is being used, it can be matched with either the LC6000
supervisory controller or a th-TUNE stand-alone controller
(see page 3 for information on the th-TUNE). If more
than one wall mount is installed, the LC6000 controller
must be matched with the air conditioning units. The
wall-mount units are specifically engineered for telecom/
motor control center rooms.
NOTE:
The LC6000 supervisory controller and
MULTI-TEC wall-mount units are designed
specifically to work together. The controller
cannot run other brands of systems, nor can
other controllers run the MULTI-TEC wall-mount
units. They are a complete system, and must be
used together.
Controller
LC6000 controller and accessories shown below.
1
One remote temperature/humidity sensor is included with the LC6000 controller. If the site in which the LC6000
controller will be used has more than one zone (maximum three zones per LC6000), additional remote temperature/
humidity sensors (one sensor per zone) will need to be purchased and installed in the additional zones. One
additional temperature-only sensor (Bard P/N 8301-058) may also be used in Zone 1 but will also need to be
purchased separately. Additional temperature/humidity sensors require field-supplied 5-wire 18 gauge shielded
cable. Temperature-only sensors require field-supplied 2-wire 18 gauge shielded cable.
(1) LC6000 Programmable Logic
Controller
Outside Air
Temperature/Humidity Sensor
Bard P/N 8301-090
(2) Communication EMI Filters
Bard P/N 8301-055
(1) TEC-EYE
TM
Hand-Held Diagnostic Tool
Bard P/N 8301-059
(1) Remote Temperature/Humidity Sensor
1
Bard P/N 8403-079
(1) 35' 5-Wire 18 Gauge Shielded Cable
Remote
Temperature Only Sensor
Bard P/N 8301-058
Optional Sensors:
+
Remote
Temperature/Humidity Sensor
1
Bard P/N 8403-079
LC6000-200 Series Controller and Accessories Included with Controller