![background image](http://html1.mh-extra.com/html/barco/event-master-e2-lite/event-master-e2-lite_user-manual_3870675134.webp)
R5909934 /00
E2 Lite and EC-40
134
Miscellaneous operations
Image 6-47: Miscellaneous operations
1
Freeze
freezes the image that is displayed in the layer. The layer can still be positioned and sized
within the destination. The text of a frozen layer turns blue and a
“
freeze
”
icon (snowflake) appears
on the bottom right corner.
2
Toggle
enables the sources to toggle back and forth with each transition.
•
‘
Toggle on:
’
After a transition is performed, a different source can be selected for preview. Once
the first source transitions off Program, it
“
flip-flops
”
to Preview. Subsequent transitions alternate
between sources. Another new source can also be selected in Preview, and as long as Toggle is
on, the last two selected sources will alternate.
•
‘
Toggle off:
’
The source selected in Preview stays in Preview, once the transition is complete.
Here, sources must be changed manually. If the PIP in Preview has a different source than the
PIP in Program, the moment Toggle is turned off, the PIP in Preview automatically changes its
source to match Program.
3
Reset
positions the layer in the center of the destination. Vertical size is set to 500 pixels and
horizontal size is set to maintain the layer
’
s aspect ratio.
4
Clear
removes the selected layer from preview. If the selected layer is on program, this button is
disabled unless the Program is unlocked.
5
Swap
enables a layer in Preview and Program to alternate back and forth with each transition.
•
‘
Swap on:
’
After a transition is performed, the layer in Preview becomes the layer in Program,
and the layer in Program becomes the layer in Preview. The layer "flip-flops" between Preview
and Program with each subsequent transition.
•
‘
Swap off:
’
The layer in Preview become the layer in Program. The layers do not alternate
between Preview and Program. If the PIP in Preview has a different source, size, or position than
the PIP in Program, the moment Swap is turned off, the PIP in Preview automatically changes to
match Program.
6
Match PGM
forces the selected layer on Preview to be in the same location as the layer in Program.
Selection
Image 6-48: Selection adjustments
Содержание Event Master E2 Lite
