![background image](http://html1.mh-extra.com/html/barco/event-master-e2-lite/event-master-e2-lite_user-manual_3870675088.webp)
R5909934 /00
E2 Lite and EC-40
88
All inputs can have an EDID (Extended Display Identification Data) set according to its connector capacity.
The currently set EDID is visible in the Current box.
Format: The drop-down menu with its search function provide a way to select any of the available VESA or
SMPTE standard EDIDs as well as a frame rate. Once selected the Apply Button needs to be pressed in
order to program the inputs.
•
EDID Timing
The EDID timing can be edited into a non standard, or Custom EDID by double clicking on each timing box
and inserting a value. A EDID timing needs to follow the VESA rules, and typically a VESA calculator
needs to be used.
Once a value is inserted ENTER needs to be pressed.
Selected EDID or Custom EDID can be applied to all inputs of the same type at once by selecting the
checkbox towards the end of the panel.
•
HDCP
Enables the HDCP setting for the selected input.
The default for DisplayPort, DVI, and HDMI inputs is Off. To turn On the HDCP Mode, click on the empty
checkbox. When the checkbox displays a check mark, HDCP Mode is On. HDCP Mode is not applicable to
SDI inputs.
•
SDI
input type
The SDI input configuration menu is similar to the DVI/HMDI/DP menu but without the EDID and HDCP
sections. In addition the SDI menu includes an addition selection regarding the SDI type.
•
Colorspace: The detected colorspace is shown
here. In the event of a non-VESA standard source
the colorspace can be unmatched to the
processing. In this case a different colorspace can
be selected to accommodate the signal. Available
are:
-
RGB, Full Range
-
RGB, Reduced Range
-
SMPTE, Full Range
-
SMPTE, Reduced Range
•
SDI type (available with SDI connector type) :
allows a choice between HD (1.5Gb), 3G (3Gb)
Level A, Level B, Level A 2SI, or Level B 2SI.
The SDI Type options vary, depending on the
format of the Outputs. For example, for:
-
NTSC/PAL
—
the SDI Type can be only SD.
-
1080i or 1080p, with a refresh rate less than or
equal to 30 Hz
—
the SDI Type can be only HD.
-
1080p, with a refresh rate greater than 30 Hz
—
the SDI Type can be:
◦
Level A (default)
◦
Level B
◦
Level A 2SI
◦
Level B 2SI
The 2SI options are available only if the Input/
Output configuration has 4 SDI connectors
from the same card, and the Output format is
either 1920 x 1080 or 2048 x 1080.
Auto Acquire Feature discussion:
When the Auto Acquire is
On
, the system performs a full sync acquisition on the input signal whenever:
•
You select an input
•
The input type changes
•
The sync rate of the input signal changes
During acquisition, the system detects and acquires the input type and resolution When In Auto Acquire is off,
the system uses the last known configuration, when possible. If the input signal is incompatible with the saved
configuration, a good input lock may not be possible. In this case, the format name field in the Status Menu
displays the Invalid Signal message.
Содержание Event Master E2 Lite
