Barco Event Master E2 Lite, Руководство пользователя

Страница: 130 / 330

R5909934 /00 E2 Lite and EC-40 130
Selected layers are highlighted with a blue border.
Aux Destination Canvas
Assigning inputs/sources to Aux destination works the same way as in the screen destinations within the
constraints of the AUX destinations. Only one input can be assigned to each destination and it is always at full
screen. Assigning a new input to the destination, overrides the previous input.
Scaler mode for Auxes are set in the Configuration Page, towards the bottom
Image 6-37: Aux Destination Canvas
6.22 Programming Menu > Layer Modifier area
General
This area is specifically for layer adjustments.
Description
The area is broken up into several sub areas. The left side is for alignment, priority, size and position of the
layer. Middle is for layer transition. The right is for misc. operations.
Image 6-38: Layer modifier area
Buttons in this area operate on selected layers in the preview destinations. If no layers are selected, all
buttons in this panel is disabled, except for the
“ Select All ” button. “ Select All ” selects all the layers in preview
for the Destinations in the current view, regardless whether the Destination is armed or not. The area is
divided into several sections. Detail description of each section is provided below.
EM GUI orientation