![background image](http://html1.mh-extra.com/html/barco/balder/balder_installation-manual_473885022.webp)
2. Lenses
Focus
controls the sharpness of the projected image.
Lens zoom and focus adjustments are motorized. You can use the remote control, local keypad, OSD and/or RS-232 commands
to adjust the lens zoom and focus positions.
Not all lenses have zoom or iris control. The matrix below shows what controls are available per lens.
EN11
EN12
EN13
EN14
EN15
EN16
EN33
EN41
EN42
EN43
EN44
EN45
EN46
EN47
Iris
✔
✔
✔
✔
✔
✔
✖
✔
✔
✔
✔
✔
✔
✔
Zoom
✔
✖
✔
✔
✖
✔
✖
✔
✖
✔
✔
✔
✔
✖
Focus
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
For best results, lens adjustments should be done in the following order: zoom, focus and then iris (where applicable).
2.7
Adjust Iris
General
Iris
controls the contrast and focus depth of the image. Decreasing the iris will increase contrast and image depth, at the same time
as it decreases brightness.
Iris control is, as for the zoom and focus control, motorized, and is operated by the remote control or local keypad.
Iris is only available for units with COLOR type colorwheel.
To enter Iris control, enter the menu
Home/Installation/Lens /Iris
Image 2-8
Use the arrow keys to adjust Iris until preferred rendering is obtained.
18
601–0442 BALDER 13/09/2017
Содержание Balder
