![background image](http://html1.mh-extra.com/html/barco/balder/balder_installation-manual_473885008.webp)
1. Safety
•
The projector is Class 1 laser product that conforms with IEC EN 60825-1:2014. For Northern America, the projector is class
3R laser product up to throw ratio 2.5. The projector conforms with IEC 60825–1:2007, and with performance standards for
laser products under 21 CFR 1040, except with respect to those characteristics authorized by Variance Number 2016–V-0144
effective March 6, 2017
Do not stare into Beam.
•
This projector is Risk Group 2 (RG2) according to IEC EN 62471-5.
This projector may become Risk Group 3 (RG3) when an interchangeable lens with throw ratio greater than 4.7 is installed. For
Northern America, installation requirements according to Risk group 3 (RG3) must be followed when interchangeable lens with
throw ratio greater than 2.5 is installed.
Refer to the manual for the lens list and throw ratio before operation.
Refer to chapter "Risk Group 3 Safety", page 51for Risk Group 3 installation.
Such combination of projector and lens are intended for
professional use only
, and are not intended for consumer use.
•
For RG3, no direct exposure to the beam shall be permitted.
For RG3, operators shall control access to the beam within the hazard distance or install the product at a height that will prevent
eye exposure within the hazard distance.
•
This projector has one (1) built-in Class 4 laser clusters. Disassembly or modi
fi
cation is very dangerous and should never be
attempted.
•
Any operation or adjustment not speci
fi
cally instructed by the user’s guide creates the risk of hazardous laser radiation expo-
sure.
•
Do not open or disassemble the projector as this may cause damage by the exposure of laser radiation.
General safety instructions
•
This product contains no user serviceable parts except the Color Wheel. Attempts to modify/replace mechanics or electronics
inside the housing or compartments will violate any warranties and may be hazardous.
Do not remove/replace any other parts than the Color Wheel. Other parts, service personnel only – Warranty void if Removed.
Follow the instructions in the User Guide to replace the Color Wheel.
•
Do not stare into beam when the projector is on. The bright light may result in permanent eye damage.
•
Not following the prescribed control, adjustment or operation procedure may cause damage by the exposure of laser radiation.
•
Before operating this equipment please read this manual thoroughly and retain it for future reference.
•
Installation and preliminary adjustments should be performed by properly trained and quali
fi
ed personnel.
•
All warnings on the projector and in the documentation manuals must be adhered to.
•
All instructions for operating and use of this equipment must be followed precisely.
•
All local installation codes should be adhered to.
Notice on safety
This equipment is built in accordance with the requirements of the international safety standards IEC60950-1, as basis for National
safety regulation world wide. The safety standard covers information technology equipment including electrical business equipment
intended to operate in “normal” environments (of
fi
ces and homes). This safety standard imposes important requirements on the
use of safety critical components, materials and insulation, in order to protect the user or operator against risk of electric shock and
energy hazard and having access to live parts. Safety standards also impose limits to the internal and external temperature rises,
radiation levels, mechanical stability and strength, enclosure construction and protection against the risk of
fi
re. Simulated single
fault condition testing reduce the risk of hazards and contribute to ensure the safety of the equipment to the user even when the
equipment’s normal operation fails.
Users de
fi
nition
Throughout this manual, the term SERVICE PERSONNEL refers to Barco authorized persons having appropriate technical training
and experience necessary to be knowledgeable of potential hazards to which they are exposed (including, but not limited to HIGH
VOLTAGE ELECTRIC and ELECTRONIC CIRCUITRY and HIGH BRIGHTNESS PROJECTORS) in performing a task, and of mea-
sures to minimize the potential risk to themselves or other persons. Only Barco authorized SERVICE PERSONNEL, knowledgeable
of such risks, are allowed to perform service functions inside the product enclosure. The term USER and OPERATOR refers to
any person other than SERVICE PERSONNEL. When installing an interchangeable lens with a throw ratio that make the projector
become an RG3 unit, (See the chapter “approved Lenses” in the installation manual), refer to chapter "Risk Group 3 Safety", page
51 for information regarding precautions.
Refer to the Installation manual Chapter 3 for the lens list and hazard distance before operation. Such combination of projector and
lens are intended for professional use only, and are not intended for consumer use.
4
601–0442 BALDER 13/09/2017
Содержание Balder
