![background image](http://html1.mh-extra.com/html/barco/balder/balder_installation-manual_473885023.webp)
3. Physical Installation
3. PHYSICAL INSTALLATION
About
This chapter describes the physical conditions and procedures required when installing the Balder projector. It also describes the
outlines and some of the considerations that should be taken in to account when designing and setting up the installation.
Each projector installation is unique, and as such the information in this chapter is only provided as a guideline. Likewise, any images
or graphical representations shown here are for illustrative purposes only.
If you require further information and assistance during the installation process, contact a quali
fi
ed projection technician or your local
support of
fi
ce for advice.
Overview
•
•
•
•
•
Mounting the projector, general considerations
•
Projector safe attachment points
•
•
•
3.1
Installation Process
Recommended Installation sequence
Item
Procedure
Read more in chapter
1
Con
fi
rm that the installation area meets all
technical and environmental requirements
See "Installation conditions", page 19
2
Decide where the projector will be mounted See "Positioning the projector", page 21
3
Unpack the projector and con
fi
rm that all
equipment is present and in good working
order
See "Initial inspection", page 20
4
Mount the projector
See "Mounting the projector, general
considerations", page 21
5
Install the projector lens
6
Connect the source
See "Projector source and control
connections", page 29
7
Power up the projector
See "Power up the projector", page 32
8
Set up the image
3.2
Installation conditions
Environmental Conditions
Barco projectors are manufactured according to speci
fi
c design standards, which also include environmental
conditions. Failing to follow the terms and conditions outlined in this chapter can result in loss of product
warranty
The table below summarize the physical environments in which the projector may be safely operated or stored.
Environment
Ambient operating
temperature
Relative Humidity
Storage condition
0 -500m
+10 to +45 °C
10 –80% RH
–20 to +60 °C, 10 – 90 % RH
500 -1500m
+10 to +40 °C
10 –80% RH
–20 to +60 °C, 10 – 90 % RH
1500 - 3000m
+10 to +35°C
10 –80% RH
–20 to +60 °C, 10 – 90 % RH
Maximum Air Flow
900m
3
/hour
10 –80% RH
Not Applicable
601–0442 BALDER 13/09/2017
19
Содержание Balder
