Barco Balder, Руководство по установке

Страница: 40 / 58

5. Image menu
Select how to adjust the white point. There are two alternatives: temperature and coordinate.
Temperature The white point is speci fi ed on a Kelvin scale between 3200K – 13000K tracking along the black body curve.
Coordinate Coordinate: The white point is speci fi ed using an x,y coordinate in the CIE 1931 Chart.
Color mode
Image / Advanced / P7 RealColor —>Color Mode
Used to set the coordinates for color processing mode: RGB, RGBCMY, White.
RGB Red, Green and Blue are moved according to the speci fi ed desired coordinates. Cyan, Magenta and Yellow
are calculated accordingly.
RGBCMY Red, Green, Blue, Cyan, Magenta and Yellow are moved according to the speci fi ed desired coordinates.
White White point only. No changes to RGBCMY. Default: White
Native Native Colors. (Color Correction Off).
Native values
System Setting/ Service / Color —>Measured values
The current measured values (WRGB ) used for RealColor processing.
These values must be accurate for RealColor to perform correctly.
Current values are presented in the color gamut diagram. Measured values are represented by a solid line.
Default: values measured at the manufacturers facility.
Custom values
Image / Advanced / P7 RealColor —>Mode
Allows users to specifying red, green blue, cyan, magenta and yellow color coordinates (x,y) and gain.
Current values are presented in the color gamut diagram. Desired values are represented by a dotted line.
36 601–0442 BALDER 13/09/2017