Baoli KBET15, Руководство оператора

Страница: 36 / 100

Starting EYEPLUS application, your system memory is read to in order to
know truck model and to properly customize all menus, because more
than one lift truck model can be available.
For example see drive motor menu in case of twin drive motors (Fig.11)
and in case of single drive motor (Fig.12).
In case panel memory is blank, user himself is automatically asked to
select truck model from a list defined in a configuration file named
“Truckmodel.ini” (listing all truck models with their main characteristics).
Moreover, if user programs flash memory, EYEPLUS software loads source
files from a directory named as lift truck model itself: this way proper
source files are automatically associated to selected truck model (see
FLASH PROGRAMMING section for further information ).
In operator mode, from main menu you can access following menus:
“ Exit ”
“ Setup ”
“ Test ”
“ Data logging ”
” Password ”
” About ”
“Setup”, “Password” (refer to
chapter 3.1.1) and “About” (Fig.3)
menus are accessible even before
starting of serial communication
between lift truck and PC (Fig.4);
in such a case some data field are
missing.
To quit application or exit a
submenu, press ESC key or select
“Exit” menu.
In case of any problems, refer to
section 4
“TROUBLESHOOTING”