Use a crane with a suitable lifting
capacity for the weight of the truck,
indicated on its designation plate.
Also take into account the weight of
the mounted battery (if applicable),
consulting the relevant designation
plate. The lifting operations must be
performed by qualified personnel. DO
NOT stand within the crane’s radius
of action or near the forklift. Use non
metallic cables. Make sure that the
lifting capacity of the slings is
suitable for the weight of the truck.
To lift the truck, proceed as
follows:
• Insert a non-metallic sling (1) into
the rear
tow coupling (2) of the truck. Check
that the
sling adheres to the upper part of the
slot in
the counterweight.
• Pass two slings (3), one on each
side,
through the upper crossmember (4)
of the
lift’s fixed mast.
• Connect the free ends of the cables
to the
hook of the crane and lift without
tearing.
The cables should have a suitable
length so as
to not graze the roof or any
additional equipment during lifting.
Use a lifting beam if necessary. The
slings must be pulled vertically.
Any other lifting and transport
method of the forklift is forbidden.
The forklift must be commissioned
exclusively by the technical support
service authorized by the
manufacturer.
Содержание KBET15
