Baoli KBET15, Руководство оператора

Страница: 24 / 100

the fluids used are
inflammable.
• Never pour petrol or diesel oil
into open, wide or low
recipients because of the risk
of inflammable vapours and
spills.
• Never use petrol, diesel oil or
inflammable fluids for
cleaning: always use non-toxic
commercial solvents.
• When using compressed air for
cleaning small parts, use
protective goggles with side
guards; use a maximum
pressure of 2.1 bars according
to local or national legislation
in force.
• When handling easily
inflammable material, do not
smoke, do not use open
flames, and do not cause
sparks in the vicinity.
• Do not use flames as a means
of illumination when
proceeding with operations or
when searching for leaks on
the machine.
• Do not carry objects in pockets
which could accidentally fall
into the open parts of the
machine.
• When there is any possibility of
being hit by metallic parts or
similar, use goggles with
protective side guards,
helmets, protective footwear
and safety gloves.
• During welding operations,
always use protective
accident-prevention devices.
Protective goggles must also
be worn by anyone in the
vicinity, even if not carrying
out work. Never look at the
welding arc without adequate
eye protection.
• With use, metal cables become
frayed: when handling them,
always use adequate
protection (gloves, goggles,
etc.). Do not use chains r ropes
that are worn or bent for lifting
or pulling.
Electrical system –
batteries
Before performing any
operation on the electrical
system, disconnect the
battery outlet from the
relative plug.
• When using the batteries, it
must be remembered that both
ends of the cables must be
linked to the terminals in the
correct manner: (+) to (+) and
(-) to (-).
• Avoid short circuiting the
battery terminals.
• The gas released from the
battery is highly inflammable.
When recharging, leave the
battery compartment open to
allow for more effective
ventilation and remove the
caps. Ensure that ventilation is
adequate in order to avoid the
possibility of accidental
explosions due to the
accumulation of gas released
during recharging.
• Never check the state of the
battery by means of a “bridge”
created by placing a metal
object on the terminals.
• Avoid sparks and flames in the
battery area.
• Do not smoke near the battery
or in the maintenance area in
order to avoid the risk of
explosions.
• Before any operation, check
that there are no electrolyte
leaks: eliminate such leaks