Baoli F Series, Руководство по эксплуатации и обслуживанию

Страница: 39 / 102

33
Fan belt inspection Inspect the fan belt for cracks, fraying and tension.
If any abnormalities are found, have the belt replaced or
adjusted by a professional serviceman.
Torque converter oil inspection
(1) Toe board
1. Park the vehicle at a safe and level ground, and stop the
engine.
Caution:
Inspect with the parking brake pedal is effected and the forks
are lowered to the ground.
2. Open the engine hood and remove the toe board.
3. Exhaust the level gauge and wipe it with clean cloth.
4. Insert the level gauge back to the hole from which it is
removed, and extract it again to check if the oil level is
among the gridding lines on the level gauge.
Retightening of bolts and nuts Retighten each bolt and nut on the chassis and load handling
system.
Greasing mast and steering
linkage
Grease in accordance with the lubrication table.
Caution:
·Clean the grease fitting tips thoroughly prior to greasing.
·After greasing, wipe off excess grease.
Fuel tank check
Check fuel tank, tank covering, fuel inlet, and drain plug
against possible fuel leak. Follow the steps below.
1. Try to smell leak.
2. Look for leak.
3. Touch possible leak.
See the nearest Baoli dealer upon finding leak and have
them repair tank immediately.
Caution:
Never perform do-it-yourself welding or other repair work for
it might cause explosion or fire.