Baoli F Series, Руководство по эксплуатации и обслуживанию

Страница: 51 / 102

45
2.6 Troubleshoot
(1) Insufficient power
Parts Problem Possible cause and remedy
Torque
converter
A. Too low oil pressure
1. Lower oil level Check oil level and add oil
2. Air entering in resulting from loose
connections Check connection or oil pipe.
Retighten each connection or
replace seal.
3. Blocked oil filter Check, clean or replace.
4. Oil can not be pumped out Check and replace
5. Deformed spring of relief valve Check tension of spring
6. Seal ring or O-ring seal damaged Check and replace
B. Fly wheel damaged Check oil, if have dirt, replace it.
Gear
Box
A .Unsuitable oil or air bubble in oil Check oil
1. Air entering in resulting from loose
connections Check connection or oil pipe.
Retighten
each connection or replace seal.
2. Too low oil pressure or air bubble in
oil
Measure and adjust pressure
B. Slipped clutch
1. Oil pressure lower Measure and adjust pressure
2. Seal ring damaged Check and replace
3. Piston ring of the clutch damaged Check and replace
4. Worn friction piece or deformed
steel piece
Replace
C. Incorrect position between inching
rod and shift rod
Check and adjust
Engine Insufficient engine power Adjust or repair engine
(2) Higher oil temperature
Parts Problem Possible cause and remedy
Torque
converter
1. Lower oil level Check oil level and add oil
2. Blocked oil filter Check, clean or replace.
3. Fly wheel bump against other parts Check oil, if have dirt, replace it.
4. Air entering in resulting from loose
connections Check connection or oil pipe. Retighten
each connection or replace seal.
5. Water mixed into oil Check and replace oil
6. Lower oil flow Check pipe and replace
7. Worn bearing Check and replace
Gear box
1. Slipped clutch Replace friction piece of clutch
2. Worn bearing Check and replace