Baoli F Series, Руководство по эксплуатации и обслуживанию

Страница: 52 / 102

46
(3) Noisy gear box
Parts Problem Possible cause and remedy
Torque
converter
1. Elasticity plate is broken Check noise and replace elasticity plate.
2. Damaged or worn bearing Check or replace
3. Gear is broken Check or replace
4. Spline is worn Check or replace
5. Noisy main pump Check or replace
6. Loosen bolt Check, tighten or replace.
Gear box
1. Bearing is worn Check or replace
2. Gear is broken Check or replace
3. Spline is worn Check or replace
4. Loosen bolt Check, tighten or replace.
(4) Too low transmission efficiency
Parts Problem Possible cause and remedy
Torque
converter
1. Elasticity plate is broken Check noise and replace
2. Lower oil amount Check oil level and add oil
3. Ineffective driving system of oil
pump
Check and replace
4. Shaft is broken Check and replace
5. Too low oil pressure Check oil pump for suction pipe
Gear box
1. Lower oil amount Check oil level and add oil
2. Seal ring is worn Check and replace
3. Slipped clutch Check oil pressure of the clutch
4. Shaft is broken Check and replace
5. Clutch cap is broken Check and replace
6. Retainer ring of clutch cap is
broken
Check and replace
7. Foreign matter mixed in oil tank Check, clean or replace.
8. Spline of shaft is worn Check and replace
(5) Oil leakage
Parts Problem Possible cause and remedy
Torque
converter
or gear
box
1. Worn seal ring Check and replace seal ring
2. Incorrect connection of case Check, tighten or replace.
3. Loose connector and oil pipe Check, tighten or replace.
4. Loose drain plug Check, tighten or replace.
5. Oil spray from vent hole
Check connector, air hole or replace
pipe.
6. Much oil Check oil level and drain surplus oil