Baoli F Series, Руководство по эксплуатации и обслуживанию

Страница: 38 / 102

32
5.
Weekly maintenance
Inspect the items below in addition to the preoperation items. Please inspect the
vehicles thoroughly every week to insure safety and pleasant working conditions.
Weekly (40-hour) inspection items
Air cleaner clean
Fan belt inspect
Torque converter oil level check
Bolts and nuts retighten
Mast and steering linkage grease
Chain lubrication lubrication oil
Frame serial number
(1) Frame serial number location
The frame serial number is stamped on the front cross plate.
Please refer to the frame serial number when making
inquiries about your vehicle.
Air filter cleaning The element can be taken out after removing the three
catches fixing the element.
Element cleaning
(1) Element
1. Tap the element filter paper lightly without causing any
damage or blow dust off with compressed air (7kg/cm
2
or
less) from inside.
2. After element cleaning, remove any dust in the evacuator
valve (optional).
Note:
．
Always replace the element if the filter paper is torn or
damaged.
．
Wash the element if heavily contaminated.
How to wash the element
(1) Evacuator valve
1. Soak the element in water containing neutral detergent for
approximately 30 minutes and then wash. Use care not to
scratch the filter paper.
2. After washing, rinse the element with clean water (water
pressure less than 2.8 kg/cm
2
).
3. Allow to dry naturally or use a dryer (cold air). Never use
compressed air or flame.
Note:
The element should be replaced after washing six times or
after it is used for one year.