Baoli F Series, Руководство по эксплуатации и обслуживанию

Страница: 88 / 102

82
(7) Fuel gauge
a. Indicate the remaining fuel in the tank, total
with 6 scales.
b. Switch on the meter, the fuel indicating needle
will return to E position, then it will run to
corresponding position with fuel capacity, and
stop turning until cutting off the power.
Caution:
After adding oil or turning on the ignition switch,
the indicating needle will stop turning after a
moment.
Caution:
．
If the road is not level, attention must be paid
because the correct level may not be indicated.
．
Especially of diesel engine, be sure to refuel it
before it stops running, once the engine cutting
out, it is necessary to bleed air from the fuel
system.
(8) Timing area
After connecting the ignition switch, the meter will
indicate the working hours. It will begin to time
after starting the engine.
The unit of the number on the right is 1/10 hour.
Master the periodic maintenance hours with the
time meter, and record the working hours.
(9) Water temperature
gauge
a. Indicate the temperature of engine cooling
water.
b. When the needle points to C, the water
temperature is less than or equal 60
℃
. If the
water temperature is higher than or equal 110
℃
(red frame position), the buzzer will sound to
remind the operator.
c. The water leakage, less engine refrigerant,
loose fan belt, dirty radiator belt or other
abnormities in cooling system may lead
temporary over-heating. Check the cooling
system.