69
Access control
The ACCESS CONTROL menu
allows you to activate a parental
lock to be able to lock specific
channels. You can also set a
maturity rating that determines
which programmes require that
you enter an access code.
When you bring up a channel list,
you can lock and unlock channels
to prevent others from watching
these. If you lock a channel in the
main list, it will be locked in all
the channel groups in which it is
present as well. When you try to
access a locked channel, you are
asked to enter the access code.
The access control system is not the
same as the pin code system for the
television, but it may be easier for you if
you choose the same code for both
systems.
Also, the access code described here is
not the same as the pin code you have
received with your Smart Card. For
information about Smart Card pin code,
contact your service provider.
Enable the access code so you can lock
channels and prevent others from editing
channel lists. You can also set a maturity
rating to limit access to certain programmes
exceeding the chosen rating if rating
information is available from the service
provider.
You can always change the access code.
The first time you bring up the ACCESS
CONTROL menu you are asked to select a
new access code.
On some markets, it is not possible to disable
access control for programmes rated 18
years and you must enter the access code
every time you bring up such a programme.
On some markets, it is not possible to select
the access code ‘0000’.
Should you forget your code …
If you forget your access code, bring up the
ACCESS CONTROL menu and press ‘9999’
three times. The access control system is
then disabled and you must enable it again
and enter a new access code. Note that
disabling the access control system is
prohibited by some programme providers.
Set up the access control system
MENU
SETUP
ACCESS CONTROL
