24
>> Set up additional equipment
You can search with latin characters and
numbers. For equipment names with non-
latin characters you can search for a part of
the name that includes latin characters. You
can also use the browse functions to locate
the correct PUC table.
You can download PUC tables at any time.
If you need more information about PUC
tables in general, contact your Bang &
Olufsen retailer.
Update PUC table software
In the PUC UPDATES menu, you can select a
PUC table and press the
centre
button to
update software for the table if new
software is available for update. You can
press the
green
button to check for updates,
the
red
button to see details about a table,
and the
yellow
button to see the history of a
table.
Unconfigure a source
If you have connected and configured a
source to a specific socket on the television
and then disconnect the source permanently,
you must reset the source settings. Highlight
the source in the SOURCE LIST menu, press
the
red
button and select RESET TO
DEFAULT. When you select YES, the source
is no longer configured to this socket. Next
time you connect a source to the socket, you
are asked to configure the source.
You can also select RESET TO DEFAULT in
the ADVANCED SETTINGS menu to reset to
default values only for this menu.
Remove a PUC table
To remove downloaded, unused PUC tables,
bring up the PUC CLEAN-UP menu. Note
that you must unconfigure the connected
product belonging to a PUC table, before
you can remove the table.
MENU
SETUP
SERVICE
PUC MANAGEMENT
PUC DOWNLOAD
PUC CLEAN-UP
PUC UPDATES
