![background image](http://html1.mh-extra.com/html/bandk/ck2-2/ck2-2_programming-manual_3077136062.webp)
CK 2.2 Keypad
Programming Manual
And
(BKC-DIP) RS232 Guide
Updated 08/13/07
Page 62 of 87
Downloading Failures
Should you have a download failure, try repeating the download. In certain
circumstances, the keypad can become locked up and might display an error message.
If this occurs, do the following:
1
Disconnect the keypad from power until the display fades away. Then, reconnect to
power and the PC.
2
Retry the download.
.
3
If still unsuccessful, save your file (if not saved already), close and reopen the editor.
4
Unplug the USB cable from the keypad. Reconnect the cable after a few seconds.
5
Open the saved file.
6
Retry the download.
Uploading from the Keypad to the PC
Uploading is necessary when you arrive at a jobsite with an existing CK 2.2 Keypad
system that you would like to service, edit or clone. Simply upload the file to your PC,
save it with a new file name and you can edit the file, send it to other remotes, make a
touch up and download back into the customer’s remote.
TIP - You cannot upload from the SR 10.1, only from the CK1.2
Keypad
1
Make sure the keypad has fresh batteries inserted correctly.
2
Connect the cable between the PC and the keypad.
3
Save any work and open a NEW empty file.
4
Click on the Upload from keypad shortcut button on the toolbar or choose Upload from
the Communications Menu.