CK 2.2 Keypad
Programming Manual
And
(BKC-DIP) RS232 Guide
Updated 08/13/07
Page 42 of 87
Learning a Batch of Buttons Efficiently
Tip: Find the correct Learning Distance using single code learning before
beginning “Batch Learning”.
Select the STARTING Button -
Select the button that is the top left of the buttons
you want to teach to. When learning a batch of buttons, the CK 2.2 Editor starts at the
top left, moves down the LCD buttons on the left, and then goes to the top right LCD
button. When learning Hard buttons, the CK 2.2 Editor starts at the top left, moves
across each row, and then moves down.
Select both the LEARN and the CONTINUE shortcut buttons -
The combination
activates the batch learning capability of the CK 2.2 Editor.
Watch the INFO Window -
When the info windows displays READY, press and
hold the button on the original keypad. When it displays GOOD, release the button.
Automatic SAVE and Reselect -
During batch processing, the CK 2.2 Editor
automatically saves and then reselects the next button. When you see that a new button
has been selected and the INFO window says READY, then teach the corresponding
button on the original keypad. This greatly speeds the learning process.
Download and Test All Learned Buttons
After the download, test all the learned buttons, and go ahead and correct the problems
as you find them.
