CK 2.2 Keypad
Programming Manual
And
(BKC-DIP) RS232 Guide
Updated 08/13/07
Page 57 of 87
Inserting Macros (Copying or Cloning Macros)
You can often speed programming by instantly inserting all of the steps of a previously
programmed macro as the starting point of a new macro. The inserted steps are
completely editable, without changing the original macro.
1
Do not start recording at the new location. Simply select the button where you would
like the macro inserted. Then click on the IMPORT MACRO button.
2
Navigate to the device and page where the original macro is programmed. Click on the
button that contains the macro. During navigation, you might click on a device button,
which happens to contain a macro. A popup window will appear asking if you want to
insert this macro. Answer NO if you are simply using the device button to navigate.
Answer YES if you want this macro copied/cloned/inserted.