background image

Introduction

The BT Home Monitor Keypad acts as a wireless remote
control for your BT Home Monitor VP1000 system.

Carry with you around the home to turn your security
system on and off, or change settings, at the touch of 
a button. The panic button functions allow you to call for
help in an emergency, ensuring that nominated contacts
receive alerts by telephone, text message and e-mail.*

You can have 2 Keypads registered with the Control Panel.
They provide a useful way to turn your system on and off
if your Control Panel is located somewhere other than
your usual entry and exit point.

Inside The Box

• 1 Wireless Keypad (Battery Included)

• Mounting Equipment

• Installation Guide

Before You Begin

Be sure you have set up your BT Home Monitor VP1000
system according to the instructions shown in the main
User Guide.

Before you proceed, check that your Control Panel says 
BT HOME MONITOR or READY. If it does not, please
consult the troubleshooting section of the main User Guide.

Note that only the MASTER CODE owner can add an
accessory.

Installation

To add a new Keypad, follow these instructions.

Step 1 – Insert The Battery

1. Remove the wall mounting bracket from the Keypad

by pushing downward.

2. Slide down the battery cover.

3. Insert the battery (observing po and –).

4. Replace the battery cover.

Step 2 – Register The Keypad

At the Control Panel, follow these instructions:

PRESS

DISPLAY

Until the display shows SYSTEM PROFILE.

Enter your MASTER CODE – if you have not
selected a personal PIN number, this will be the
default setting – 2580.

Until the display shows ADD / DEL KEYPAD 1.

Display shows 1-WAY KP NO:–

Enter the Keypad number you want e.g. 1, 
or press NEXT to find the next available 
Keypad location.

Display shows ACTIVATE NOW.

Press the 

button (next to 

0

) on the Keypad

for two seconds. You will hear a confirmation
melody.

Display shows KEYPAD NO: (number), e.g.

.

The Keypad is now registered. Choose either:

To move to the next Keypad. Or:

Three times, then <OK> to exit and return 
to READY.

Please remember to update your personal online account
with this information so that your monitoring service can
report information accurately.

BT Home Monitor Keypad 

VP

Installation and User Guide

BT Home Monitor Keypad VP – Edition 08 – 21.03.03

1

NEXT

SHOW / OK

NEXT

SHOW / OK

SHOW / OK

NEXT

0

HOME

Downloaded from www.ukpanels.com

Содержание Home monitor keypad







Отзывы: