B&G Zeus3 Glass Helm Скачать руководство пользователя | Manualshive

Страница: 58 / 140

background image

•

CMCF (Canadian Meteorological Centre Forecast) – PredictWind forecast based on the
weather observation from the Canadian Meteorological Centre. Available for Offshore
GRIB only.

•

GFS (Global Forecast System) - a weather observation file from the National Oceanic and
Atmospheric Administration (NOAA) of the USA Department of Commerce.

•

GFSF (Global Forecast System Forecast) - PredictWind forecast based on the weather
observation from the National Oceanic and Atmospheric Administration (NOAA) of the
USA Department of Commerce. Available for Offshore GRIB only.

Wind and Pressure

The wind and/or pressure data from PredictWind. Available for Offshore GRIB only.

Time step

The size of the time step in the downloaded forecast. For example, a 3 hour time step could
provide weather data for 1200, 1500, 1800 etc., where a 6 hour time step could only provide
1200, 1800 etc. Smaller steps require larger downloads.

Forecast length

The period of the forecast in days. Available for CMCF or GFSF models on Offshore GRIB only.

Resolution

GRIB resolution, select 50 or 100 kilometers between forecast points. Available for Offshore
GRIB only.

Specify PredictWind GRIB overlay file

The Forecast menu option shows the GRIB file which is currently displayed on the chart. If no
file is displayed on the chart, then the menu option does not show a GRIB file.

GRIB file displayed on the chart

No GRIB file displayed on the chart

Select the Forecast menu option to open the GRIB Weather dialog.

The GRIB Weather dialog shows which GRIB file is currently displayed as overlay on the chart
and which files are available for display.
Available GRIB files are files downloaded manually or automatically from PredictWind to the
Gribs directory. If you copy GRIB files from the memory card to the Gribs directory using the
file manager, they will be listed as available GRIB files.
Select an available GRIB file to import it into memory and display it as overlay on the chart.
Select the Import file option to import a GRIB file into memory from the memory card or any
directory available to the File manager.

Ú

Note:

GRIB data that is imported overwrites the GRIB data in memory.

Expired GRIB files

The system identifies GRIB files that have expired and moves them from the available GRIB
files list to the expired GRIB files list. Expired files are files where the time of the final forecast
has passed. Select the Delete expired GRIB files option to delete these expired files from the
system.

58

PredictWind

| Zeus3 Operator Manual

«
...
56
57
58
59
60
...
»

Содержание Zeus3 Glass Helm













































































































































Отзывы:

Нет отзывов

Похожие инструкции для Zeus3 Glass Helm

Бренд: Fahrenheit Technologies Страницы: 63

Бренд: Farenheit Страницы: 39

Бренд: Farenheit Страницы: 31

Бренд: Naxa Страницы: 15

Бренд: Lexus Страницы: 393

Бренд: NavLinkz Страницы: 25

Бренд: Kicker Страницы: 9

Бренд: Clarion Страницы: 83

Бренд: flexvision Страницы: 32

Бренд: Phonocar Страницы: 4

Бренд: Seat Страницы: 17

Бренд: Solem Страницы: 18

Бренд: Toyota Страницы: 12

Бренд: Toyota Страницы: 25

Бренд: Toyota Страницы: 27

Бренд: Toyota Страницы: 19

2016 ENTUNE AUDIO

Бренд: Toyota Страницы: 44

Бренд: Hyundai Mobis Страницы: 105

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды