manualshive.com logo in svg

B&G Zeus3 Glass Helm, Руководство оператора

Поделиться
Скачать
B&G Zeus3 Glass Helm Скачать руководство пользователя страница 129

Simulator

The simulation feature lets you see how the unit works in a stationary position and without

 

being connected to other devices.
The status bar indicates if the simulator is toggled on.

Demo mode

In this mode the unit automatically runs through the main features of the product; it changes
pages automatically, adjusts settings, opens menus, etc.
If you tap on a touchscreen or press a key when demo mode is running, the demonstration
pauses. After a time-out period, demo mode resumes and any changed settings are restored
to default.

Ú

Note: 

Demo mode is designed for retail/showroom demonstrations.

Simulator source files

You can select which data files are used by the simulator. A set of source files is included in
your system, and you can import files by using a card inserted into the card reader. You can
also use your own recorded log data files in the simulator.

Advanced simulator settings

The Advanced simulator settings allows for manually controlling the simulator.

25 

Simulator

| Zeus3 Operator Manual

129

Содержание Zeus3 Glass Helm













































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды