B&G Zeus3 Glass Helm Скачать руководство пользователя | Manualshive

Страница: 70 / 140

background image

The following sections describe the settings that can be changed by the user. The settings
are described per autopilot computer.
Installation settings are available in the documentation following the autopilot computers.

Chart compass

You can select to show a compass symbol around your boat on the chart panel. The
compass symbol is off when the cursor is active on the panel.

Locking autopilot operation from a unit

You can lock a unit to prevent unauthorized operation of the autopilot. When the unit is
locked, it is indicated with a lock symbol and with text in the pop up. No automatic modes
can be selected from a locked display.

Ú

Note:

The lock function is not available on a unit which has autopilot control!

If the Zeus³ is part of an AP24/AP28 system, all other autopilot control units can be locked for
autopilot control from the AP24/ AP28 control unit.

H5000 Autopilot computer

Performance (H5000)

The Performance controls the response of the autopilot steering. There are five levels of
performance modes:

•

Level one consumes the least amount of power when steering the autopilot and offers
the slowest response

•

Level five consumes the most power and has the highest response

The performance mode is indicated in the top left corner of the autopilot page.

Steering (H5000)

This option allows for manually changing parameters that were set during the
commissioning of the autopilot computer. For more details of the settings, refer to the
separate documentation for the autopilot computer.

•

Automatic response: controls the rate that which the autopilot reacts to any
environmental influences on the vessels desired course

- Off: The autopilot will always remain in the response mode selected
- Economy: The autopilot will need to sense large environmental changes before

increasing the response setting

- Normal: The autopilot will need to sense moderate environmental changes before

increasing the response settings

- Sport: The autopilot will be most sensitive to changing conditions and will

automatically increase its response rate to counter environmental changes

•

Recovery: Allows the user to set the sensitivity to course errors and how the autopilot will
react to unexpected events, for example sudden wave or wind shifts. This function allows
the autopilot to instantaneously increase the steering response to its maximum setting
(Perf 5), and make a rapid recovery. The Recovery will automatically switch off after 15

70

Autopilot

| Zeus3 Operator Manual

«
...
68
69
70
71
72
...
»

Содержание Zeus3 Glass Helm













































































































































Отзывы:

Нет отзывов

Похожие инструкции для Zeus3 Glass Helm

Бренд: dB Technologies Страницы: 4

Бренд: Grundig Страницы: 34

Colorado RCR 127

Бренд: Blaupunkt Страницы: 23

Бренд: Nav TV Страницы: 4

Бренд: JVC Страницы: 51

Бренд: AudioBahn Страницы: 15

Бренд: Pioneer Страницы: 8

Бренд: Pioneer Страницы: 64

Бренд: Pioneer Страницы: 64

Бренд: Harman Kardon Страницы: 3

Honda CS-CRV12 CRV

Бренд: Car Show Страницы: 14

Бренд: Hyundai Mobis Страницы: 234

Бренд: Pyle Страницы: 31

Бренд: Gazer Страницы: 92

Бренд: E.P.C Страницы: 10

Бренд: Whitmore Страницы: 38

Бренд: Audiotec Fischer Страницы: 24

Бренд: K-Rain Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды