Baldor MotiFlex e100, Руководство по установке, Страница: 126 / 220

www.baldormotion.com
6-24 Configuration MN1943
6.5 Further configuration
Mint WorkBench provides a number of other tools for testing and configuring the MotiFlex
e
100.
Every tool is explained fully in the help file. Press F1 to display the help file, then navigate to the
Mint WorkBench book. Inside this is the Toolbox book.
6.5.1 Parameters tool
The Parameters tool can be used to view or change most of the drive’s parameters.
1. Click the Parameters icon in the Toolbox
on the left of the screen.
The main area of the Mint WorkBench
window displays the Parameters editor
screen.
Items listed with a grey icon are Read Only so cannot be changed.
Items listed with a green icon are currently set to their Factory Default value.
Items listed with a yellow icon have been altered from their factory default value, either
during the commissioning process or by the user.
2. In the parameters tree, scroll to the
required item. Click on the small + sign
beside the item’s name.
The list will expand to show all items in the
category.
Click on the item you wish to edit.
3. The adjacent table will list the chosen item.
Click in the Active Table cell and enter a
value.
This immediately sets the
parameter, which will remain in the
MotiFlex
e
100 until another value is
defined. The icon to the left of the item will become yellow to indicate that the value has been
changed.
Many of the MotiFlex
e
100’s parameters are set automatically by the Commissioning Wizard,
or when tests are performed in the fine-tuning window.