Baldor MotiFlex e100 Скачать руководство пользователя страница 120 | Manualshive

Страница: 120 / 220

Baldor MotiFlex e100 Скачать руководство пользователя страница 120

www.baldormotion.com

6-18 Configuration

MN1943

6.4.7 Further tuning - with load attached

To allow Mint WorkBench to adjust the basic tuning to compensate for the intended load, it is
necessary to attach the load to the motor and then perform the autotune procedure again.

1. Attach the load to the motor.

2. Click the Autotune icon in the Toolbox on the

left of the screen.

3. Click the Autotune on load check box.

4. Click

START

to begin the auto-tuning process.

Mint WorkBench will take measurements from
the motor and then perform small test moves.

5. Click the Fine-tuning icon in the Toolbox on the

left of the screen.

6. In the Velocity tab’s Test Parameters

area,

ensure

the

same

move

parameters are entered and then click

Go

to start the test move.

Mint WorkBench will perform the test
move and display a graph of the
result.

«
...
118
119
120
121
122
...
»

Содержание MotiFlex e100





























































































































































































































Отзывы:

Нет отзывов