Baker Hughes Panametrics Aurora H2O, Руководство пользователя

Страница: 43 / 92

3.6 Setting up the alarms
NOTE: The Aurora H2O is not equipped with alarm relays. The alarm function is useful only when reading the alarm status
via modbus.
3.6.1 Selecting an alarm output
To set up alarm outputs,
on the main menu choose
alarm and press enter.
From the alarm menu
choose select and press
enter. A screen similar to
the following appears.
Use the arrow keys to
select the output (A, B or
C) to be set up and press
enter. The display returns
to the alarm menu.
3.6.2 Selecting alarm status
To select the alarm status,
from the alarm menu
select status and press
enter. The following screen
appears:
Use the arrow keys to
select off or on and press
enter. The display returns
to the alarm menu.
3.6.3 Selecting alarm units
To select alarm units, from
the alarm menu select
units and press enter. Use
the arrow keys to select
the unit type and press
enter.
If hygro was selected,
this display appears. Use
the arrow keys to select a
unit. Press enter to save
(or cancel to keep the
previous value), and return
to the alarm menu.
If temperature was
selected, this display
appears. Use the arrow
keys to select a unit. Press
enter to save (or cancel to
keep the previous value),
and return to the alarm
menu.
If pressure was selected,
this display appears. Use
the arrow keys to select a
unit. Press enter to save
(or cancel to keep the
previous value), and return
to the alarm menu.
33