Baker Hughes Druck DPI 620 Genii, Инструкция по эксплуатации

Страница: 52 / 166

Copyright 2013 Baker Hughes Company.
40 | DPI 620G Instruction Manual–English
Chapter 4. Electrical Tasks
4.2 Measure DC Voltage
Figure 4 - 2 shows CH1 set up to measure a DC voltage (0 to 30 V) or DC mV (0 to 2000 mV).
Figure 4 - 2: Measure DC Volts or DC mV on CH1 (Range ± 30 V)
Note: When using the CH2 connectors, set up CH2 to measure this range.
1. Set the applicable channel option: CH1, Measure, Voltage (or Millivolts), V (or mV).
2. Complete the electrical connections and continue with the measure operation.
4.3 Measure AC Voltage (CH1) – 20 V RMS Maximum
Figure 4 - 3 shows CH1 set-up to measure an AC voltage (0 to 20 V RMS) or AC mV (0 to
2000 mV RMS).
Figure 4 - 3: Measure AC Volts or AC mV on CH1 (Range ± 20 V RMS)
1. Set the applicable channel options: CH1, Measure, AC Volts, V.
WARNING
To prevent electrical shocks, use only the Druck specified AC
probe (Part: IO620 - AC) to measure AC voltages that are more than 20 V RMS
(maximum: 300 V RMS). Refer to Section 4.4.