Baja WD250U, Руководство по обслуживанию

Страница: 206 / 232

Washer selection table
The washer thickness is 0.57mm, by calculation,
the washer thickness should select 0.60mm ac -
cording to above table.
3. Select washer [B]
When replacing left crankcase or forward gear,
the forward gear washer [B] needs to be
adjusted.
1) Calculate the washer thickness of forward
gear by following formula.
Washer thickness of forward gear:
[B]= (d) - (c) - (e) - (f)
(d) and (c) are the value engraved on the left
crankcase
(e) = (at the forward gear) bearing thickness
(no change)
“13.00mm”
(f) =Theory installing distance “37.5” of for -
ward gear adds value engraved on forward gear.
2) For example:
• If “d=110.08” is engraved on left
crankcase, “c=59.02”
• If “=0.02” is engraved on the forward gear,
(f) =37.5+0.02=37.52
• So the washer thickness is:
[B]=110.08-59.02-13.00-37.52=0.54mm
3) The following is the prepared washer thick -
ness (mm)
0.2 0.4
0.3 0.5
Range of A Selected washer
0.25≤A≤0.32 0.3
0.35<A≤0.42 0.4
0.42<A≤0.52 0.5
0.52<A≤0.62 0.6
0.62<A≤0.72 0.7
0.72<A≤0.75 0.8
205