Baja WD250U, Руководство по обслуживанию

Страница: 205 / 232

[A] =a-b
[B] =d-c-e-f
[C] =d-g-h-i
[D] =j+c-e-B-k-l-0.25
(1) Left crankcase
(2) Output gear
(3) Forward shift gear
(4) Output shaft
(5) Reverse gear
(6) Rear cover
2. Choose washer [A]
• When changing the crankcase or output
gear, adjust output gear washer [A]
10 Calculate the washer thickness of output
gear by following formula “A”:
Washer thickness of output gear:
A= (a) - (b)
(a) =Theory installing distance42 of output
gear adds the value engraved on the output
gear.
(b) is the value engraved on crankcase
CAUTION:
All the units about the value is mm
2) For example
• If “+0.02” is engraved on the output gear
that is: a =42+0.02=42.02
• If “41.45” is engraved on the left crankcase
• So the washer thickness is:
A=42.02-41,45=0.57mm
3_ The following is prepared thickness of
washer (mm):
0.2 0.4
0.3 0.5
Changed parts Washer needed to be
adjusted
Crankcase [A] [B] [C] [D]
Output gear [A]
Forward gear [B] [D]
Reverse gear [C] [D]
Rear cover [C] [D]
Output shaft [D]
204