Baileigh TS-1040C, Руководство оператора

Страница: 57 / 84

54
54
Adjusting the Bevel Angle Pointer
The bevel pointer should read “0” when the blade is
at 90° to the table. If not, with the blade set 90°
vertical to the table, proceed as follows:
1. Disconnect and lockout power to the saw!
2. Remove the handwheel by loosening the
handwheel lock knob.
3. Once the hand wheel has been removed, loosen
the cap screw on the pointer mounting bracket
with screw driver, and manually align the pointer
with the zero on the bevel scale, then re-tighten the
screw and re-attach the hand wheel.
Blade Tilt/Bevel Adjustment
The blade tilt (bevel) adjustment handwheel (C) is located on the side of the saw. The bevel
locking lever (D) is located under the table at the front of the saw and allows the user to lock the
tilting mechanism and secure the blade at the desired angle.
To change the angle of the blade:
1. Loosen the bevel locking handle (D) by turning it
counter-clockwise.
2. Turn the handwheel (C) left or right as required to
set the blade to the desired angle. The blade can
be tilted to the left anywhere from 0° (90° to the
table) to 45°.
3. With the blade tilted to the desired angle, tighten
the bevel locking handle by turning it clockwise to
lock the tilting mechanism and secure the blade.