Baileigh Industrial BSVT-18P, Руководство оператора

Страница: 45 / 56

42
42
Causes of Inaccurate Cutting
•
Worn or mis-adjusted blade brush.
•
Dull blade.
•
Debris under the stock being cut.
•
Incorrect feed rate or feed pressure settings or excessive or rapid adjusting of these settings
while the cut is being made.
IMPORTANT: Do not allow excessive metal chips to buildup in the pan. The chips
may be carried back into the saw causing premature wearing of the blade, blade guides and
blade wheels. Clean the cutting fluid tray as often as needed.
Clamping
These examples below show ways to clamp a variety of cross sections. Always keep in mind the
cutting capacity of the saw to achieve efficient saw cuts and long blade life. Do not use blades of
a size different from that shown in the technical specification chart.