Baileigh Industrial BSVT-18P, Руководство оператора

Страница: 26 / 56

23
23
MACHINE SETUP AND ADJUSTMENTS
Blade Changing
Blade changes are periodically required when they become worn or to match the properties of
varying materials.
1. Disconnect power to the machine.
2. Make certain the cutting head is locked in the vertical position.
3. Unlock the clamps on both the upper and lower blade wheel housings and open the covers.
4. Remove the front blade guard (A).
5. Loosen the blade tension handwheel (B) to lower
the upper wheel.
1. Remove the blade from both wheels, out of each
blade guide (C), out of the saw frame back guard
(D), and around the chip brush (E).
2. Carefully remove the blade through the large
opening in the saw table.
3. Using compressed air, blow out metal chips and
grit from between the bearings, blade guides, and
inside of the blade guards and covers.
4. With both hands, grasp the uncoiled blade in a
vertical position with the teeth pointing towards you
and down.
5. From the right side of the saw, feed the blade into
the saw table opening and loop the top of the blade
over the top bladewheel.
6. Working from the top down, insert the blade into
the saw frame back guard (D).
7. Twist the front of the blade 90 degrees and slide it
into the upper and lower blade guides (C).
CAUTION:
Even dull blades are
sharp to the skin! Use extra caution handling
band saw blades!
Wear gloves for protection
from the sharp blade!
A
B
C
E
D