Baileigh Industrial BSVT-18P, Руководство оператора

Страница: 23 / 56

20
20
Item Description Function
A Main Disconnect Switch Turn this switch to power the machine on and off.
B Left Coolant Drip Tray Deflects coolant back to the reservoir.
C Coolant Rinse Hose.
Uses coolant to spray and rinse saw chips into the base
coolant tray to clear the cutting and clamping area of the
saw and allow the chips to be collected for recycling.
D E-Stop
Press to immediately stop all machine functions. To restart
machine, twist it clockwise until the button disengages.
E Feed Force Gauge This gauge indicates the feed force of the cutting head.
F Feed Force Knob
Sets the forward feed force of the cutting head. Pull the
knob to unlock. Push the knob to lock. Turn the knob
clockwise to increase force. Turn the knob
counterclockwise to decrease force.
G Coolant Switch
Turn arrow to "I" to turn on coolant flow. Turn arrow to "O"
to stop coolant flow.
H Light Switch Turn work light on and off.
I Start Button Press to start band saw blade.
J Stop Button Press to stop band saw blade.
K Power Indicator Light Illuminates whenever main machine power is On.
L Blade Speed Control Knob
Turn this knob clockwise to change the blade speed.
(Surface Feet per Minute.)
M Led Readout Identifies blade speed in surface feet per minute.
N Worktable
Two-piece table to support and hold the vise and the
material to be cut. (Use additional support and clamping to
secure larger piece of material.)
O Vise
Used to clamp and hold the material during the cutting
operation. (Use additional support and clamping to secure
larger piece of material.)
P Vise Quick Adjusting Block
When unlocked, lifting upward on the vise leadscrew will
allow the vise to be pushed or pulled quickly.
Q Vise Adjusting Handwheel Turn the handwheel to clamp or loosen the vise plates.
R Manual Feed Handwheel Used to manually move the saw bow forward or reverse.
S Right Coolant Drip Tray Deflects coolant back to the reservoir.