manualshive.com logo in svg

Bad Boy 1025H, Руководство оператора, Страница: 8 / 144

Поделиться
Скачать
Bad Boy 1025H Скачать руководство пользователя страница 8

1

-

2

BRANSON TRACTOR

SAFETY PRECAUTIONS

If the instructions in this chapter are 

ignored, it may cause a machine fail

-

ure, a fatal accident with injury or 

death.
For further detailed information, refer 

to each chapter.

BEFORE USING THE MA-

CHINE

㭂ጚṦ#㊓≮㱲

Ventilating

Wide and flat enough area;

• 

Inspect or repair the tractor on 

a wide and flat area. 

If this instruction is ignored, an 

unexpected accident may occur, 

such as overturning of the trac-

tor.

WARNING

• 

Please understand that some 

of the figures or contents in 

this manual may not match 

with your own machine due to 

the product variation.

• 

This tractor is not designed 

for road driving. Please use a 

truck to move this machine on 

the public roads.

NOTE

Beware of exhaust gas;

• 

Running the engine, repairing 

(tightening) any painted part 

or grinding any painted area 

should be performed only in a 

well-ventilated area.

If this instruction is ignored, the 

exhaust gas or dust can cause 

intoxication and lead to fatal 

consequences.

WARNING

1025H.indb   2

1025H.indb   2

2021-07-06   오전 11:07:31

2021-07-06   오전 11:07:31

Содержание 1025H

















































































































































Отзывы:

Нет отзывов