Bad Boy 1025H Скачать руководство пользователя страница 14

Страница: 14 / 144

BRANSON TRACTOR

▖⮓ⳮ⪺

Ⲃ#Ⱨ᝾៎1

☎Ὧ☆

Read manual

before drive

Operator

manual

Use Pesticides safely;

•

Careless use of agricultur-

al chemicals such as disinfec-

tants, herbicide, pesticides,

rat poison, and fertilizer can

be harmful to environment

and human body. Be sure to

observe all relevant regulation

and instructions to use the ag-

ricultural chemicals efficient-

ly and safely. Then it may pre-

vent injury or accident.

WARNING

Properly train anyone operating;

•

Explain the handling tips in

detail and make sure the driv-

er reads the Manual before

driving.

If this instruction is ignored,

there is a risk of death, serious

injury, or damage to tractor.

WARNING

Precautions for children;

•

Fully warn the children and

keep them away from the trac-

tor at all times.

If this instruction is ignored, un-

expected accident of injury can

happen.

WARNING

1025H.indb 8

2021-07-06 오전 11:07:33

Содержание 1025H

















































































































































Результаты поиска

Содержание 1025H

Отзывы:

Bad Boy 1025H, Руководство оператора, Страница: 14 / 144

Результаты поиска

Содержание 1025H

Отзывы: